SS  Richard Montgomery Matter



 

 

              DVD Region unlock codes for players g-h

All files and Information are "as is" for personal use only, with no warranty for any  particular use or  purpose and  downloaded at your own risk/responsibility.  

By downloading these files it is agreed that Full responsibility of use is with the downloader/user.

   For The Latest  DVD region unlock codes click here now!

DVD region unlock codes main Index page

 

Hyundai DVD-320A

Converting the player to Multi-Region (newer firmware):

 

1. Press 7, 7 on the remote.

2. Press Play.

3. You should now be in a hidden menu.

4. Using the Up and Down buttons on your remote control, highlight the Country

Code option.

5. Press Enter.

6. Using your remote control, press the 1 button for region 1, 2 for region 2,

and so on, or 0 for multi-region playback.

7. Press Enter.

8. Press Play.

Alternatively, try:

 

1. Ensure there is no DVD in the player.

2. Press 7, 7.

3. Press "0" (0 = region-free, or enter the number of the region required).

Converting the player to Multi-Region (older firmware):

 

1.  Press Open/Close on your remote control to open the disc tray

2.  Press 3.

3.  Press 8.

4.  Press 0.

5.  Press 0.

6.  Press Menu.

7.  Press Arrow buttons on your remote control to change the region to 1 for

region 1, 2 for region 2, and so on

8.  Press Enter.

9.  Press Menu.

 

 

Hyundai DM-350

 

 

1.  Open the player's tray.

2.  Press Setup on your Remote Control

3.  Go to the sub-menu "Custom Setup" by pressing the right arrow on your Remote

4 times

4.  Press 3, 3, 3 and 3.

5.  You should be taken into a new menu entitled "Secret1 Menu".

6.  Select 0 for region free.

7.  Press Setup.

 

 

Hyundai HDP-550S

 

 

1. Press Open/Close on the remote.

2. Press Stop.

3. Press 1, 9, 9 and 9.

4. You should now be in a secret menu.

5. Press Enter.

6. Select the All option for multi-region playback.

7. Press Enter.

8. Press Play.

 

 

 

Hyundai HDV-2000

 

 

1.  Open the player's tray.

2.  Place a disc in the tray but don't close it.

3.  Press Enter on the Remote.

4.  Press Play.

5.  Press 2, 5 and 8.

6.  Press 1 for Region 1, 2 for Region 2, 4 for Region 4 etc. on your Remote

Control.

7.  An error message will appear, after this your machine should be set the

region specified.

8.  Play your disc.

 

 

 

Hyundai HU-2010

 

 

1.  Open the player's tray.

2.  Press Setup on your Remote Control

3.  Go to the sub-menu "Custom Setup" by pressing the right arrow on your Remote

3 times

4.  Press 3, 3, 3 and 3.

5.  You should be taken into a new menu entitled "Secret1 Menu".

6.  Select 0 for region free.

7.  Press Setup.

 

 

GE Digital GE1105P

 

 

1.  Power on the player and ensure tray is empty.

2.  Hold down Play and Stop together, on the player panel, to cold boot.

3.  You should see a set of language options.  Release the PLAY and STOP

buttons.

4.  Select your language.

5.  Press Repeat then the following codes for the required region the player is

already set to (region you bought the player in):

Region 1 - 2, 9, 3, 3, 4

Region 2 - 3, 8, 7, 6, 7

Region 3 - 5, 6, 7, 3, 2

Region 4 - 7, 6, 8, 8, 4

Region 5 - 5, 3, 8, 1, 4

Region 6 - 2, 4, 4, 6, 2

6.  A code will appear, indicating the region setting of your player.

7.  Press 9 for region-free, or 1 for region 1, 2 for region 2, etc.

8.  Press Open/Close on the Player to open the disc tray.

9.  Press Standby (Power) on the remote control to close the tray.

If the player sticks on FBI warning screens, press Forward Search x2 or faster. 

 The disc should then skip straight to the main feature.

Region 1 players may not skip to main feature by the fast forward method.

 

 

Genica Kalua GN-800

 

 

1.  Press Open/Close, Zoom, A-B, Up, Left, Down on the remote control.

Converting to Multi-Region if the above does not work:

 

1.  Eject the player's tray.

2.  Press 2, 1, 8, 0 on the remote.

3.  Press 9 for region free (or region number).

 

To disable Macrovision:

 

1. Open the player's tray.

2. Press 4, 5, 6, 1, followed by 1 for Macrovision off, or 0 for Macrovision on.

 

 

Genica Kalua GPX-DV2000

Converting to Multi-Region if the above does not work:

 

1.  Eject the player's tray.

2.  Press 2, 1, 8, 0 on the remote.

3.  Press 9 for region free (or region number).

 

To disable Macrovision:

 

1. Open the player's tray.

2. Press 4, 5, 6, 1, followed by 1 for Macrovision off, or 0 for Macrovision on.

 

 

 

Go-Video 850

 

 

1.  Turn on the player.

2.  Open the system tray.

3.  Press Setup.

4.  Highlight Custom on the Setup menu.

5.  Press 3, 3, 3, 3.

6.  A hidden menu will appear headed "Secret1".

7.  Select region 0 for region free.

 

 

Go-Video 855

 

 

1.  Turn on the player.

2.  Open the system tray.

3.  Press Setup.

4.  Highlight Custom on the Setup menu.

5.  Press 3, 3, 3, 3.

6.  A hidden menu will appear headed "Secret1".

7.  Select region 0 for region free.

 

 

Go-Video 860

 

 

1.  Turn on the player.

2.  Open the system tray.

3.  Press Setup.

4.  Highlight Custom on the Setup menu.

5.  Press 3, 3, 3, 3.

6.  A hidden menu will appear headed "Secret1".

7.  Select region 0 for region free.

 

 

Go-Video 865

 

 

1.  Turn on the player.

2.  Open the system tray.

3.  Press Setup.

4.  Highlight Custom on the Setup menu.

5.  Press 3, 3, 3, 3.

6.  A hidden menu will appear headed "Secret1".

7.  Select region 0 for region free.

 

 

Go-Video DVP-750

 

 

1.  Turn on the player.

2.  Open the system tray.

3.  Press 0, 1, 0, 6.

4.  Press 0 for all regions (or desired region number).

 

 

Go-Video DVP-1100

 

 

1.  Press Play 8 times.  (May actually need to be pressed at least 9 or 10

times)

2.  When you see a code come on in the upper left corner of the TV screen, Press

0, 1, 0, 6,  and 9 for region free.

3.  9 should appear on the TV screen.

4.  Wait until at least 5 seconds after this 9 disappears from your TV screen.

 

 

Go-Video DVR-4100

Enable VCD Playback:

1.  Power on the player with no disk in the drive.

2.  Press Pause on the remote.

3.  Press 1 ,4, 7, 2 on the remote.

4.  Press UP arrow three times.

5.  Press Program, 5, Program, 5      (the characters 04 EE should now be

displayed).

6.  Press Enter     (the display should flash briefly).

7.  Press Return.

8.  Power the player off and then back on.

9.  Play a VCD!

 

 

Go-Video DVR-4200

Enable VCD Playback:

1.  Power on the player with no disk in the drive.

2.  Press Pause on the remote.

3.  Press 1 ,4, 7, 2 on the remote.

4.  Press UP arrow three times.

5.  Press Program, 5, Program, 5      (the characters 04 EE should now be

displayed).

6.  Press Enter     (the display should flash briefly).

7.  Press Return.

8.  Power the player off and then back on.

9.  Play a VCD!

This may not work on some models.

 

 

Goodmans GDVD-67LCD

 

 

1.  Press Setup on your remote control.

2.  Press Next.

NB: If steps 2 thru 5 have no effect, try the equivalent buttons on the player

itself.

 

3.  Press Prev.

4.  Press Next.

5.  Press Prev.

6.  A code should appear on the onscreen display.

7.  Using the direction buttons on your remote control, change the code to VER

255 for multi-region playback.

8.  Press Setup.

Converting to Multi-Region if the above does not work:   (with additional

options)

 

1.  Press Setup on your remote control.

2.  Press Next.

NB: If steps 2 thru 5 have no effect, try the equivalent buttons on the player

itself.

3.  Press Prev.

4.  Press Next.

5.  Press Prev.

6.  A code should appear on the onscreen display.

7.  Using the direction buttons on your remote control, change the code to VER

255 for multi-region playback.

NB: You may need to use the up and down buttons to select the region option

before you change it.

8. Press Down once and change the code to VER 3001 to enable parental controls,

or VER 3000 to disable these controls.

NB: You may need to use the up and down buttons to select the parental controls

option before you change it.

9. Press Down once more and change the code to VER 4001 to enable Macrovision,

or VER 4000 to disable this feature.

NB: This option does not work for the player, which is actually a clone of the

Mustek V56S.

10. Press Down once again and change the code to VER 5001 to disable VCD/SVCD

playback, or VER 5000 to enable this feature.

NB: You may need to use the up and down buttons to select the VCD/SVCD playback

option before you change it.

11. Press Setup.

12. Press Setup.

  

 

Goodmans DVD-100D

 

 

1.  Ensure there is no disc in the player

2.  Press Setup, Menu, Step, Previous and Next on the remote control

3.  A service menu should appear

4.  Select the required region or use Bypass for region free.

  

 

Goodmans DVD-107R

 

 

1.  Open the the player disc tray.

2.  Press 9, 8, 1 and 7 on the Remote.

3.  You will now be in the hidden menu.

4.  Select the region by pressing Enter. (9 is region free).

5.  You can also disable Macrovision from this screen.

NB: If your TV does not support NTSC, you can also set the output to PAL from

this screen.

 

 

Goodmans DVD-124

 

 

1.  Open the the player disc tray.

2.  Press 7 and 4 on the Remote Control. If this doesn't work, you may have to

enter the digits 7 and 7 instead.

3.  Press Enter,

4.  Scroll down to Country Code and using the Select button, choose any Region

between 1 and 6, or select 13 for Region free.

5.  Press Return to exit the menu.

 

 

Goodmans DVD-125

 

 

1.  Turn on the player and Open disc tray.

2.  Press Setup.

3.  Select Custom.

4.  Press 3, 3, 3, 3 and 3.

5.  This opens the secret settings menu offering Regions 0-6 (choose 0 for

Region free).

 

 

Goodmans DVD-130

 

 

1.  Turn on the player and Open disc tray.

2.  Press Setup.

3.  Select Custom.

4.  Press 3, 3, 3, 3 and 3.

5.  This opens the secret settings menu offering Regions 0-6 (choose 0 for

Region free).

 

 

Goodmans GDVD-131

 

 

1.  Press Setup on the Remote Control.

2.  Press Vol+.

3.  Press Vol-.

4.  Press Vol+.

5.  Press Vol-.

6.  The onscreen display should show "VER #" indicating the currently Region

setting

Using the Left and Right cursor keys, Change the region code.  255 is region

free.

7.  Press Setup.

 

 

Goodmans GDVD-134

 

 

1.  Turn on the player and Open disc tray.

2.  Press Setup.

3.  Press 2, 8, 1, 2 and Enter.

4.  This gets you to the engineers menu.

5.  Press Down until you reach COUNTRY CODE and press Enter.

6.  The current region code will change to four dashes (----).

7.  Input one number (0=Region Free, 1=USA 2=Europe, etc) and press Enter again.

 

8.  The new region code will now be displayed. You can exit by just pressing the

Eject button once more.

 

Enabling VCD playback:

 

1.  Turn On the player and place a VCD on the tray.

2.  Press Close, Menu and 5 on the front panel.. at the same time press 5 on the

remote.

This should load and play the disc. If the disc fails to play then press 0, 0,

0, 1 and the disc should then play.

 

 

Goodmans GDVD-135

 

 

1.  Turn on the player and Open disc tray.

2.  Press Setup.

3.  Press 2, 8, 1, 2 and Enter.

4.  This gets you to the engineers menu.

5.  Press Down until you reach COUNTRY CODE and press Enter.

6.  The current region code will change to four dashes (----).

7.  Input one number (0=Region Free, 1=USA 2=Europe, etc) and press Enter again.

 

8.  The new region code will now be displayed. You can exit by just pressing the

Eject button once more.

Enabling VCD playback:

 

1.  Turn On the player and place a VCD on the tray.

2.   Press Close, Menu and 5 on the front panel.. at the same time press 5 on

the remote.

This should load and play the disc. If the disc fails to play then press 0, 0,

0, 1 and the disc should then play.

 

 

Goodmans GDVD-141

 

 

1.  Switch the player on and off.

2.  Press and hold Stop, until Settings menu appears.

3.  The player should now be multi region.

 

Goodmans DVD-513

 

 

1.  Open the the player disc tray.

2.  Press 9, 8, 1 and 7 on the Remote.

3.  You will now be in the hidden menu.

4.  Select the region by pressing Enter. (9 is region free).

5.  You can also disable Macrovision from this screen.

NB: If your TV does not support NTSC, you can also set the output to PAL from

this screen.

 

 

Goodmans DVD-515

 

 

1.  Open the the player disc tray.

2.  Press Menu

3.  Press 7, 4, 2 and 0.

 

 

Goodmans DVD-1000D

 

 

1.  Ensure there is no disc in the player

2.  Press Setup, Menu, Step, Previous and Next on the remote control

3.  A service menu should appear

4.  Select the required region or use Bypass for region free.

  

 

Goodmans DVD-3000

 

 

1.  Press Menu.

2.  Press 1, 6, 7 on your remote control.

3.  The key region box will pop up.

4.  Key in the region you want.

5.  Press Mute.

 

Converting this player to enable VCD playback:

 

1.  Insert a music CD

2.  Press Menu, 5 and Eject on the remote control

3.  The tray should stay closed

4.  Press 1, Index, Menu and Eject on the remote

5.  A menu should now appear

6.  Press 1 to enable VCD playback

 

Goodmans DVD-3500PK

 

 

1.  Open the the player disc tray.

2.  Press 9, 8, 1 and 7 on the Remote.

 

3.  You will now be in the hidden menu.

4.  Select the region by pressing Enter. (9 is region free).

5.  You can also disable Macrovision from this screen.

NB: If your TV does not support NTSC, you can also set the output to PAL from

this screen.

NBB: If this hack does not work, try Pressing 8, 9, 1,  and 7 in step 2.

 

 

Goodmans DVD-3600PKT

 

 

1.  Power on the player and Open the tray

2.  Press 8, 1, 3, 2, 8.

3.  Press Enter until you highlight 9 (Multi-Region).

4.  Press Play.

5.  The machine is permanently multi-region.

Enabling VCD playback:

 

1.  Turn On the player and place a VCD on the tray.

2.  Press Close, Menu and 5 on the front panel.. at the same time press 5 on the

remote.

This should load and play the disc. If the disc fails to play then press 0, 0,

0, 1 and the disc should then play.

 

 

Goodmans DVD-5000

 

 

1.  Put the player into Standby

2.  Press 0, 0 on the remote control

3.  Press 1 for region 1, 2 for region 2 etc.

4.  To verify the current region press 0, 0 and +10 to indicate the region on

the front panel.

  

 

Goodmans GDV-100D

 

 

1.  Ensure there is no disc in the player

2.  Press Setup, Menu, Step, Previous and Next on the remote control

3.  A service menu should appear

4.  Select the required region or use Bypass for region free.

  

 

Goodmans GDV-124

 

 

1.  Open the the player disc tray.

2.  Press 7 and 4 on the Remote Control. If this doesn't work, you may have to

enter the digits 7 and 7 instead.

3.  Press Enter,

4.  Scroll down to Country Code and using the Select button, choose any Region

between 1 and 6, or select 13 for Region free.

5.  Press Return to exit the menu.

 

 

Goodmans GVD-107R

 

 

1.  Open the the player disc tray.

2.  Press 9, 8, 1 and 7 on the Remote.

3.  You will now be in the hidden menu.

4.  Select the region by pressing Enter. (9 is region free).

5.  You can also disable Macrovision from this screen.

NB: If your TV does not support NTSC, you can also set the output to PAL from

this screen.

NBB: If this hack does not work, try Pressing 8, 9, 1,  and 7 in step 2.

 

 

Goodmans GDV-125

 

 

1.  Turn on the player and Open disc tray.

2.  Press Setup.

3.  Select Custom.

4.  Press 3, 3, 3, 3 and 3.

5.  This opens the secret settings menu offering Regions 0-6 (choose 0 for

Region free).

 

 

Goodmans GVD-513

 

 

1.  Open the the player disc tray.

2.  Press 9, 8, 1 and 7 on the Remote.

3.  You will now be in the hidden menu.

4.  Select the region by pressing Enter. (9 is region free).

5.  You can also disable Macrovision from this screen.

NB: If your TV does not support NTSC, you can also set the output to PAL from

this screen.

NBB: If this hack does not work, try Pressing 8, 9, 1,  and 7 in step 2.

 

 

Goodmans GTV14DVD

 

 

1.  Press the DVD function on your TV set.

2.  Press Setup on your remote control.

3.  Press 1, 3, 6 and 9, in order, one at a time.

4.  Immediately press the Left Arrow button on your remote control three times.

5.  Immediately press the Right Arrow button on your remote control once.

6.  The on-screen display should now show the word VERSION.

7.  Select this option and using your remote control, change it to 1 for region

1, 2 for region 2, and so on, or 0 for multi-region playback.

To convert this player to Multi-Region if the above does not work:

 

1.  Press the DVD function on your TV set.

2.  Press Stop on your TV set.

3.  Press 1, 9, 9 and 9 on the remote  in order, one at a time.

4.  Press Enter.

5.  You should now be in a secret area where you can change the region to 1 for

region 1, 2 for region 2, and so on, or 0 for multi-region playback.

 

 

Goodmans GTV34DVD

 

 

1.  Press the DVD function on your TV set.

2.  Press Setup on your remote control.

3.  Press 1, 3, 6 and 9, in order, one at a time.

4.  Immediately press the Left Arrow button on your remote control three times.

5.  Immediately press the Right Arrow button on your remote control once.

6.  The on-screen display should now show the word VERSION.

7.  Select this option and using your remote control, change it to 1 for region

1, 2 for region 2, and so on, or 0 for multi-region playback.

To convert this player to Multi-Region if the above does not work:

 

1.  Press the DVD function on your TV set.

2.  Press Stop on your TV set.

3.  Press 1, 9, 9 and 9 on the remote  in order, one at a time.

4.  Press Enter.

5.  You should now be in a secret area where you can change the region to 1 for

region 1, 2 for region 2, and so on, or 0 for multi-region playback.

  

 

 

GPX DV2000

 

 

1.  Eject the player's tray.

2.  Press 2, 1, 8, and 0 on the remote.

3.  Press 0 for region free (or a region number).

Converting to Multi-Region if the above does not work:

 

1.  Eject the player's tray.

2.  Press 8, 9, 2, and 6 on the remote.

3.  Press 0 for region free (or a region number).

To disable Macrovision:

 

1.  Eject the player's tray.

2.  Press 4, 5, 6 and 1 on the remote.

3.  Press 1 to Turn off Macrovision, or turn it on again by pressing 0.

This does not work for some.  Macrovision may not work.

 

Gradiente 6500

 

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 0, 0, followed by the region number required, or use Clear for region

free.

 

 

Gradiente 6500HT

 

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 0, 0, followed by the region number required, or use Clear for region

free.

 

 

Gradiente D-10

 

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 3, 1, 4, 1, 5, 9, 0 and 0 on the remote.

3. Press Exit.

4. You should receive a message in English and the machine is now in Region Free

mode.

Converting to Multi-Region if the above does not work:

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 0, 0, followed by the region number required, or use Clear for region

free.

 

 

Gradiente D-12

 

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 3, 1, 4, 1, 5, 9, 0 and 0 on the remote.

3. Press Exit.

4. You should receive a message in English and the machine is now in Region Free

mode.

Converting to Multi-Region if the above does not work:

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 0, 0, followed by the region number required, or use Clear for region

free.

 

 

Gradiente D-22

 

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 0, 0, followed by the region number required, or use Clear for region

free.

 

 

Gradiente DVD-5000

 

 

Verify your current region code setting:

1.  Press 00 and +10 a led will blink number of region.

2.  With player off (stand-by mode) - Press 00 and the region code desired.

 

Note: You can verify your present region setting by pressing 00 and +10.

the front panel display will flash the current region setting

 

Advantage: easy, free

Disadvantage: you can only change the region code! NOT region free!

Converting to Multi-Region if the above does not work:

 

1. Put the player into standby.

2. Press 0, 0.

3. For region 1 press '1'. For region 2 press '2'. For any other region press

the corresponding key on the remote.

Your player is now set to that region only. To play a disc from an alternative

region reset the player to the desired region.

 

 

 

Gradiente K-30

 

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 3, 1, 4, 1, 5, 9, 0 and 0 on the remote.

3. Press Exit.

4. You should receive a message in English and the machine is now in Region Free

mode.

Converting to Multi-Region if the above does not work:

 

1. Turn the player on and ensure there is no disc in the tray.

2. Press 0, 0, followed by the region number required, or use Clear for region

free.

 

 

Graetz AV-250n

 

 

1. Power on the Player.

2. Press Open/Close.

3. Press 3, 3, 0, 8, 8, 0 .

4. Press Open/Close.

Once you turn the machine off it reverts to the original setting.

 

 

Graetz AV-330I

 

 

1. Press Open to open the tray.

2. Press Intro, 2, 0, 1 and 1.

3. Press 0 for region free (or region umber required).

4. Press Close and then play the disc.

Once you turn the machine off it reverts to the original setting.

Converting to Multi-Region if the above does not work:

 

1. Press Open.

2. Press Setup.

3. Press 1 3 6 9

4. Press < < <

5. Press >

6. version will open

7. Enter version and change region.

Setting stays after power off!

 

Grundig GCV-720HT

 

 

1.  Power on the player and Open the tray.

2.  Press 8, 1, 3, 2 and 8.

3.  Press Enter until you highlight 9 (Multi-Region).

 

 

Grundig GDV-100D

NOTE: Please note that this conversion may only work a maximum of 25 times! And

after this time the machine may end up locked to the last region changed to.

 

To play a Region 1 DVD on this player:

 

1.  Press Play, 2, 7 and 4 on your remote control. The onscreen display should

look like this: '____ ____'.

2.  Press 0, 0, 5, 0, 0, 0, 1, 2, 8, 1, 5, 6 on the remote.

3.  Press Play.

4.  The onscreen display should turn red, indicating that your region settings

have been changed.

Converting the player back to Region 2 mode:

 

NOTE: Please note that this conversion may only work a maximum of 25 times! And

after this time the machine may end up locked to the last region changed to.

 

1.  Press Play, 2, 7 and 4 on your remote control. The onscreen display should

look like this: '____ ____'.

2.  Press 0, 0, 2, 0, 0, 0, 1, 2, 8, 1, 5, 6 on the remote.

3.  Press Play.

4.  The onscreen display should turn red, indicating that your region settings

have been changed.

To reset the player to its original factory settings and Region 2 playback:

 

NOTE: This has only been tested on the Philips 710. There is an outside chance

this may also get round the 25 region change limit, but will not unlock a region

locked machine.

 

1.  Press Play, 1, 5 and 9 on your remote control. The onscreen display should

look like this: '____ ____'.

2.  Press 0, 0, 4, 0, 0, 1, 0, 0, 0, 1, 4,  0 on the remote..

3.  Press Play..

4.  The onscreen display should return to the original Philips splash screen,

all settings will be reset back to factory defaults.

This does not always work!

 

Grundig GDVD-125

 

 

1.  Open the drive tray.

2.  Press Setup on your remote control.

3.  From the Setup Menu highlight the Custom Setup option.

4.  Press the buttons 3, 3, 3 and 3 on your remote control in order, one at a

time.

5.  You should now be in a hidden menu where you may change the region to 1 for

region 1, 2 for region 2, and so on.

 

 

 

Grundig GDV-130

Converting the player to Multi-Region (newer firmware):

 

1.  Press Open on the Remote.

2.  Press Setup.

3.  Press 9 button on the Remote for Region Free, or 1 for Region 1, 2 for

Region 2, and so on

4.  Press buttons 2, 0, 0 and 0.

5.  Press Step.

6.  Press Shuffle.

7.  Press Next.

To check the current region setting of this player on later firmware versions,

press the following button in order from the Remote Control:

 

1.  Press Open.

2.  Press Setup.

3.  Press Shuffle.

4.  Press Step.

5.  Press Next.

6.  A secret menu will appear, inside which you can scroll down until the words

Debug Item appears. This is where the current region status is displayed.

Converting the player to Multi-Region (older firmware):

 

1.  Open the drive tray.

2.  Press Setup on your remote control.

3.  From the Setup Menu highlight the Custom Setup option.

4.  Press the buttons 3, 3, 3 and 3 on your remote control in order, one at a

time.

5.  You should now be in a hidden menu where you may change the region to 1 for

region 1, 2 for region 2, and so on.

 

 

Grundig GDV-131

Converting the player to Multi-Region (newer firmware):

 

1.  Press Setup on your remote control.

2.  Press VOL+.

3.  Press VOL-.

4.  Press VOL+.

5.  Press VOL-.

6.  The onscreen display should show "VER #" indicating the currently set

region.

7.  Using the left and right cursor keys, change the region code to 1 for Region

1, 2 for Region 2, and so on, or set it to 255 for multi-region playback.

8.  Press Setup.

 

 

Grundig GDV-200

 

 

1.  Open the DVD players tray

2.  Place a Region 1 disc in the tray, but don't close it

3.  Press 0, 1, 2 and then 3 on the Remote Control in order, one at a time

4.  Press Play.

To change the player back to Region 2 only functionality:

 

1.  Open the DVD players tray

2.  Place a Region 2 disc in the tray, but don't close it

3.  Press the buttons Return and then Play on the Remote Control in order, one

at a time.

 Earlier firmware versions will not play The Matrix and require an upgrade, this

does not remove the hack. Earlier firmware freezes with RCE encoded discs.

 

Grundig GDV-210

 

 

1.  Open the DVD players tray

2.  Place a Region 1 disc in the tray, but don't close it

3.  Press 0, 1, 2 and then 3 on the Remote Control in order, one at a time

4.  Press Play.

To change the player back to Region 2 only functionality:

 

1.  Open the DVD players tray

2.  Place a Region 2 disc in the tray, but don't close it

3.  Press the buttons Return and then Play on the Remote Control in order, one

at a time.

 Earlier firmware versions will not play The Matrix and require an upgrade, this

does not remove the hack. Earlier firmware freezes with RCE encoded discs.

 

Grundig GDV-210A

 

 

1.  Open the DVD players tray

2.  Place a Region 1 disc in the tray, but don't close it

3.  Press 0, 1, 2 and then 3 on the Remote Control in order, one at a time

4.  Press Play.

To change the player back to Region 2 only functionality:

 

1.  Open the DVD players tray

2.  Place a Region 2 disc in the tray, but don't close it

3.  Press the buttons Return and then Play on the Remote Control in order, one

at a time.

 Earlier firmware versions will not play The Matrix and require an upgrade, this

does not remove the hack. Earlier firmware freezes with RCE encoded discs.

 

Grundig GDV-211

 

 

1.  Power on your machine.

2.  Press Stop, Open/Close and Skip buttons on your player simultaneously and

hold down for 3 seconds.

3.  A hidden menu should appear. Release the Stop, Open/Close and Skip buttons

on your player.

4.  Select Region Number from the hidden menu and choose the Free option.

5.  Exit the menu.

 

 

Grundig GDV-211A

 

 

1.  Power on your machine.

2.  Press Stop, Open/Close and Skip buttons on your player simultaneously and

hold down for 3 seconds.

3.  A hidden menu should appear. Release the Stop, Open/Close and Skip buttons

on your player.

4.  Select Region Number from the hidden menu and choose the Free option.

5.  Exit the menu.

Earlier firmware versions will not play The Matrix and require an upgrade, this

does not remove the hack. Earlier firmware freezes with RCE encoded discs.

 

Grundig GDV-212

 

 

1.  Open the DVD players tray

2.  Place a Region 1 disc in the tray, but don't close it

3.  Press 0, 1, 2 and then 3 on the Remote Control in order, one at a time

4.  Press Play.

To change the player back to Region 2 only functionality:

 

1.  Open the DVD players tray

2.  Place a Region 2 disc in the tray, but don't close it

3.  Press the buttons Return and then Play on the Remote Control in order, one

at a time.

 Earlier firmware versions will not play The Matrix and require an upgrade, this

does not remove the hack. Earlier firmware freezes with RCE encoded discs.

 

 

Grundig GDV-220

 

 

1.  Power on your machine.

2.  Press Stop, Open/Close and Skip buttons on your player simultaneously and

hold down for 3 seconds.

3.  A hidden menu should appear. Release the Stop, Open/Close and Skip buttons

on your player.

4.  Select Region Number from the hidden menu and choose the Free option.

 

5.  Exit the menu.

 

 

Grundig GDV-520

 

 

1.  Press Menu.

2.  Press 1, 6 and 7.

3.  For Multi-Region mode press Mute (1 for region 1, 2 for region 2...).

Some titles from Warner Brothers may not play.

 

Grundig GDV-520A

 

 

1.  Press Menu.

2.  Press 1, 6 and 7.

3.  For Multi-Region mode press Mute (1 for region 1, 2 for region 2...).

This MAY ONLY WORK ONE TIME for the 520A.  Some titles from Warner Brothers may

not play.

 

Grundig GDV-620HT

 

 

1.  Open the the player disc tray.

2.  Press 9, 8, 1 and 7 on the Remote.

3.  You will now be in the hidden menu.

4.  Select the region by pressing Enter. (9 is region free).

5.  You can also disable Macrovision from this screen.

NB: If your TV does not support NTSC, you can also set the output to PAL from

this screen.

 

 

Grundig GDV-720HT

 

 

1.  Open the the player disc tray.

2.  Press 8, 1, 3, 2 and 8 on the Remote.

3.  A window should appear on your TV.

4.  Press Enter to move to Region 9.

5.  Press Play to close the drawer. (Should now be permanently multi region).

NB: If your TV does not support NTSC, you can also set the output to PAL from

this screen.

Enabling VCD playback:

 

1.  Turn On the player and place a VCD on the open tray

2.  Using the front panel press Close quickly followed by Menu and 5 on the

remote

3.  This should load and play the disc. If the disc fails to play then press 0,

0, 0, 1 and the disc should then play

4.  If this fails to work then you may wish to consider using the hack for the

Goodmans GDVD-135.

 

 

Grundig GDP-3100

 

IMPORTANT!!! Be certain to read the note in blue after the hack!

 

1.  Select "i" on the remote.

2.  Choose "installation" [box 5].

3.  Choose "extended settings" [box 5].

4.  Choose "service menu" [box 3].

5.  Choose "dealer service menu" [box 2].

6.  Code needed here is: 8500.

7.  Choose "system messages".

8.  Choose "on" and press the < button [to the left of the "ok" button on your

remote].

9.  Go back to the "service menu".

10. Choose "system information".

11. With the remote, press 70307196 - [note that the number will not show on the

screen while you do this].

12. If you typed it correctly, a box with "system messages" appears and a word

or a number will appear next to it.

NB: If the word reads "none" then forget the whole thing, as you are already

region free... if there's a number there then that is the region your unit is

using.

14. Press "ok" on the remote to change the region.

15. Use the down button [directly under the "ok" button on the remote] to scroll

down the list.

16. Select the word "none" to make your unit region free.

17. The warning you see is probably meant to do nothing more than frighten you.

18. Press "i" to end.

On some models, the above method actually wrecks your player!   You have been

warned!!!

 

Grundig GDP-3200

 

IMPORTANT!!! Be certain to read the note in blue after the hack!

 

1.  Select "i" on the remote.

2.  Choose "installation" [box 5].

3.  Choose "extended settings" [box 5].

4.  Choose "service menu" [box 3].

5.  Choose "dealer service menu" [box 2].

6.  Code needed here is: 8500.

7.  Choose "system messages".

8.  Choose "on" and press the < button [to the left of the "ok" button on your

remote].

9.  Go back to the "service menu".

10. Choose "system information".

11. With the remote, press 70307196 - [note that the number will not show on the

screen while you do this].

12. If you typed it correctly, a box with "system messages" appears and a word

or a number will appear next to it.

NB: If the word reads "none" then forget the whole thing, as you are already

region free... if there's a number there then that is the region your unit is

using.

14. Press "ok" on the remote to change the region.

15. Use the down button [directly under the "ok" button on the remote] to scroll

down the list.

16. Select the word "none" to make your unit region free.

17. The warning you see is probably meant to do nothing more than frighten you.

18. Press "i" to end.

On some models, the above method actually wrecks your player!   You have been

warned!!!

 

Grundig GDP-4200

 

IMPORTANT!!! Be certain to read the note in blue after the hack!

 

1.  Select "i" on the remote.

2.  Choose "installation" [box 5].

3.  Choose "extended settings" [box 5].

4.  Choose "service menu" [box 3].

5.  Choose "dealer service menu" [box 2].

6.  Code needed here is: 8500.

7.  Choose "system messages".

8.  Choose "on" and press the < button [to the left of the "ok" button on your

remote].

9.  Go back to the "service menu".

10. Choose "system information".

11. With the remote, press 70307196 - [note that the number will not show on the

screen while you do this].

12. If you typed it correctly, a box with "system messages" appears and a word

or a number will appear next to it.

NB: If the word reads "none" then forget the whole thing, as you are already

region free... if there's a number there then that is the region your unit is

using.

14. Press "ok" on the remote to change the region.

15. Use the down button [directly under the "ok" button on the remote] to scroll

down the list.

16. Select the word "none" to make your unit region free.

17. The warning you see is probably meant to do nothing more than frighten you.

18. Press "i" to end.

On some models, the above method actually wrecks your player!   You have been

warned!!!

 

 

 

Grundig GDP-5100

 

 

1.  Select "i" on the remote.

2.  Choose "installation" [box 5].

3.  Choose "extended settings" [box 5].

4.  Choose "service menu" [box 3].

5.  Choose "dealer service menu" [box 2].

6.  A code is needed here, it's 8500.

 

7.  Choose "system messages".

8.  Choose "on" and press the < button [to the left of the "ok" button on your

remote].

9.  Go back to the "service menu".

10. Choose "system information".

11. Press 7, 0, 3, 0, 7, 1, 9,  and 6 on the remote - [note that the number will

not show on the screen while you do this].

12. A box with "system messages" appears and a word or a number will appear next

to it.

13. If the word reads "none" then the player is already region free... if

there's a number there then that is the region your unit is using.

14. Press OK on the remote to change the region.

15. Use the down button [directly under the OK button on the remote] to scroll

down the list.

16. Select the word "none" to make your unit region free.

17. press "i" to end.

On some models, the above method may actually wreck your player!   You have been

warned!!!

 

Grundig GDP-6150

 

 

NB: Get into the Service Menu. This is not intended for home users, only for

service technicians. Therefore you're asked for an access code, it is 8500 for

all Xenaro DVD Players.

 

1.  Activate "System Messages" using the Service Menu

2.  Leave the Service Menu and get into the "System Information" Menu

3.  When you see the System Infos, enter the following code on the remote

control. Note that the player will not print the code on the screen, you have to

enter it blindly. The code is: 70307192

4.  A system message should appear. It will not appear if you got the code wrong

or if you did not activate system messages in the service menu. Confirm the

message with OK on your remote

5.  Now a window appears in which you can change your region code. Values 1 to 8

and "none" are possible. "None" will disable the internal check of region codes

(i.e. makes the player CodeFree), but RCE titles might not work. This doesn't

really matter, as you can change the code as often

as you wish to match a specific disc.

6. If you want to, you can disable System Messages again using the Service Menu

after you changed the code.

RCE discs may not play in region free mode.  Switch to the region of the disc.

 

Grundig SE-1230

 

IMPORTANT!!! Be certain to read the note in blue after the hack!

 

1.  Select "i" on the remote.

2.  Choose "installation" [box 5].

3.  Choose "extended settings" [box 5].

4.  Choose "service menu" [box 3].

5.  Choose "dealer service menu" [box 2].

6.  Code needed here is: 8500.

7.  Choose "system messages".

8.  Choose "on" and press the < button [to the left of the "ok" button on your

remote].

9.  Go back to the "service menu".

10. Choose "system information".

11. With the remote, press 70307196 - [note that the number will not show on the

screen while you do this].

12. If you typed it correctly, a box with "system messages" appears and a word

or a number will appear next to it.

NB: If the word reads "none" then forget the whole thing, as you are already

region free... if there's a number there then that is the region your unit is

using.

14. Press "ok" on the remote to change the region.

15. Use the down button [directly under the "ok" button on the remote] to scroll

down the list.

16. Select the word "none" to make your unit region free.

17. The warning you see is probably meant to do nothing more than frighten you.

18. Press "i" to end.

On some models, the above method actually wrecks your player!   You have been

warned!!!

 

 

GRUNKEL DVG-20NT

 

 

1.  Press Setup, Stop, Skip Backwards, Skip Forwards on the remote.

2.  You should then be able to change region and remove Macrovision.

 

 

 

GVG DV-910B

 

 

1. Power up the DVD player with no disc in.

2. Press Setup to access the normal menu.

3. Press STOP then |>| (next track).

4. A factory debug menu will appear with the option to bypass regions and

disable macrosvision along with a few other things.

 

 

 

 

Haaz HZ-250

 

1.  Open the player's tray.

2.  Press 9, 9, 9, 9 on the remote.

3.  Press OK.

4.  Press required region or 9 for region free.

NB: If the sequence in step 2 doesn't work, try 8, 4, 2, 1.

 

 

Haaz HZ-270

 

 

1.  Make sure there is no DVD in the player's tray.

2.  Press 2, 9, 1, 8, Enter on the remote.

3.  You should then be in the hidden menu, where you change the region on the

first page, or use 13 for region free.

4.  You can also disable Macrovision on the second page of the menu.

 

 

 

Harmon/Kardon DVD-1

 

 

1.  Put the player into Standby mode, with no disc in the tray.

2.  Press: 3 1 4 1 5 9 and 2 from the remote.

3.  Then press the zone you want: 1-4.

4.  Power the player On.

5.  Play the disc you want to.

 

 

Harmon/Kardon DVD-5

 

 

1.  Put the player into Standby mode, with no disc in the tray.

2.  Press: 3 1 4 1 5 9 and 2 from the remote.

3.  Then press the zone you want: 1-4.

4.  Power the player On.

5.  Play the disc you want to.

NB: that the Region code entered is stored when the player is switched off,

therefore you will need to change Region for each disc. However it maybe that

entering '0' for the Region code will set the player to Region free operation.

 

 

Harmon/Kardon DVD-10

 

 

1.  Put the player into Standby mode, with no disc in the tray.

2.  Press: 3 1 4 1 5 9 and 2 from the remote.

3.  Then press the zone you want: 1-4.

4.  Power the player On.

5.  Play the disc you want to.

NB: that the Region code entered is stored when the player is switched off,

therefore you will need to change Region for each disc. However it maybe that

entering '0' for the Region code will set the player to Region free operation.

This does not work on all DVD-10 players.

 

Harmon/Kardon DVD-20

 

 

1.  Put the player into Standby mode, with no disc in the tray.

2.  Press: 3 1 4 1 5 9 and 2 from the remote.

3.  Then press the zone you want: 1-4.

4.  Power the player On.

5.  Play the disc you want to.

NB: that the Region code entered is stored when the player is switched off,

therefore you will need to change Region for each disc. However it maybe that

entering '0' for the Region code will set the player to Region free operation.

 

 

Harmon/Kardon DVD-25

 

 

1.  Download the dvd25_upgrade.zip file.

2.  Burn this file to a CD/RW disc.

3.  This firmware upgrade will give region free setting with Marcrovision off

and Progressive scan.

 

 

Harmon/Kardon DVD-50

 

 

1.  Put the player into Standby mode, with no disc in the tray.

2.  Press: 3 1 4 1 5 9 and 2 from the remote.

3.  Then press the zone you want: 1-4.

4.  Power the player On.

5.  Play the disc you want to.

NB: that the Region code entered is stored when the player is switched off,

therefore you will need to change Region for each disc. However it maybe that

entering '0' for the Region code will set the player to Region free operation.

 

 

Harmon/Kardon DVD-1500

 

 

1.  Put the player into Standby mode, with no disc in the tray.

2.  Press: 3 1 4 1 5 9 and 2 from the remote.

3.  Then press the zone you want: 1-4.

4.  Power the player On.

5.  Play the disc you want to.

NB: that the Region code entered is stored when the player is switched off,

therefore you will need to change Region for each disc. However it maybe that

entering '0' for the Region code will set the player to Region free operation.

 

 

 

Haus H-315LS

 

 

1.  At the Logo screen press Stop

2.  Press 2, 3, 1 and 7.

3.  Enter the Region you require

4.  Power off the DVD player

5.  Power on the DVD player and play the disc.

Converting to Multi-Region if the above does not work:

 

1.  Press the Stop button on the Remote Control twice

2.  Press 1, 9, 9 and 9 on the Remote

3.  You should now be in a hidden set-up menu where you can change the Region

code to 1 for Region 1, 2 for Region 2, and so on, or All for multi-region

playback.

 

 

Haus H-615LS

 

 

1.  At the Logo screen press Stop

2.  Press 2, 3, 1 and 7.

3.  Enter the Region you require

4.  Power off the DVD player

5.  Power on the DVD player and play the disc.

Converting to Multi-Region if the above does not work:

 

1.  Press the Stop button on the Remote Control twice

2.  Press 1, 9, 9 and 9 on the Remote

3.  You should now be in a hidden set-up menu where you can change the Region

code to 1 for Region 1, 2 for Region 2, and so on, or All for multi-region

playback.

 

 

 

Haus H-2001S

 

 

 

1.  Press Stop twice.

2.  Press Setup.

3.  Press Vol+ & Vol- repeat the sequence twice in quick secession (+, -, +, -).

 

4.  The TV screen will display "VER #". Press Left/Right cursor keys to change

the # - (1, 2, 3, 4, 5, 6 for desired Region Code). For Multi-Region press 255

5.  Press Setup.

 

 

Region Free Helios DVDHelios - Most Models

 

 

1.  Open the drive tray.

2.  Press the Setup button on the Remote.

3.  Press 1, 9, 9 and 9 on the Remote.

4.  Select the REGION option from the hidden menu that appears to change to

Multi-Region or a specific Region.

5.  Turn off the machine with Remote Control.

6.  Turn the machine back on with the Remote Control.

7.  Insert the disc from the Region you want to play.

 

 

Himage 595

 

 

1.  Press Open on the Remote Control to open the drive tray

2.  Press 8, 8, 0 and 0.

3.  Press 1 for Region 1, 2 for Region 2, etc, or 9 for Region Free.

4.  Press the Open button on the Remote to close the drive tray.

 

 

Himage DVD-2290

 

 

1.  Press Open on the Remote Control to open the drive tray

2.  Press 8, 8, 0 and 0.

3.  Press 1 for Region 1, 2 for Region 2, etc, or 9 for Region Free.

4.  Press the Open button on the Remote to close the drive tray.

 

 

Himage DVD-8800

 

 

1.  Press Open on the Remote Control to open the drive tray

2.  Press 8, 8, 0 and 0.

3.  Press 1 for Region 1, 2 for Region 2, etc, or 9 for Region Free.

4.  Press the Open button on the Remote to close the drive tray.

 

 

Himage DVD-9900

 

 

1.  Press Open on the Remote Control to open the drive tray

2.  Press 9, 9, 0 and 0.

3.  Press 1 for Region 1, 2 for Region 2, etc, or 9 for Region Free.

4.  Press the Open button on the Remote to close the drive tray.

 

 

Himax DH-1111

 

 

1.  Power on the player.

2.  Open CD tray.

3.  Press INTRO.

4.  Press 2, 0, 1,  and 1.

5.  Press 0 for region free, or desired region number.

6.  Close the CD tray.

 

 

Himax DH-2288

 

 

1.  Power on the player.

2.  Open CD tray.

3.  Press INTRO.

4.  Press 2, 0, 1,  and 1.

5.  Press 0 for region free, or desired region number.

6.  Close the CD tray.

 

 

Hitachi DV-P250E

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DV-P305E

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DV-P305U

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DV-P310

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DV-P315A

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

 

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DV-P315

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DV-P315A

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DV-P415A

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

 

Hitachi DV-P415U

 

 

1.  Open the player's tray.

2.  Press and hold the Enter button on the Remote control

3.  Whilst holding Enter down, press 1 for Region 1, 2 for Region 2 and so on

4.  Release and play a DVD.

 

 

 

Hitachi DV-P505

 

 

1.  Press Setup button on the Remote.

2.  Press Last.

3.  Press Skip Previous.

4.  Press Skip Next.

5.  You will now enter the 'Loop Holes' menu where you can alter the player

region.

 

 

Hitachi DV-P505E

 

 

1.  Download the latest firmware here.

2.  Create a CD-R in a computer CD-R recorder with bank30.rom as content.

3.  Plug in the AC cord on DV-P505.

4.  Press Power.

5.  Press Open key to open the tray.

6.  Put the disc on the tray.

7.  Press the Close button to close the tray.

8.  Wait about 30 seconds.

9.  When the process finish, the tray will automatic open and the DVD player

will be turned off automatically.

10. Remove the disc from the tray.

11. Press the Power key and the tray will close.

12. Press the Setup key on the remote. Then the menu appear.

13. Select the GENERAL SETUP and Press Enter.

14. Select DEFAULTS and Press the Enter key.

15. Select RESET and press the Enter key.

16. Press Setup.

This hack will cause the player to lose the ability to play MP3 files...

PERMANENTLY!! 

 

Hitachi DV-P515E

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi DVP-515

Always perform a Cold Start before applying the hack below:

 

1.  Power on your player whilst pressing hold both the Play and Stop buttons on

the front player

2.  After a short while you should be presented with a set of language options.

3.  Release Play and Stop on the player.

4.  You will now need to select a language option between 1 and 6.

 

 

1.  Press Repeat on the Remote Control.

2.  Using the Remote enter the code below, note that you must know what Region

your player is currently set to in order to know which code is appropriate

 

Region 1 use 2, 9, 3, 3 and 4

Region 2 use 3, 8, 7, 6 and 7

Region 3 use 5, 6, 7, 3 and 2

Region 4 use 7, 6, 8, 8 and 4

Region 5 use 5, 3, 8, 1 and 4

Region 6 use 2, 4, 4, 6 and 2

 

3.  A code should be displayed on the screen indicating the current Region

setting of your unit.

4.  Press 9 on the Remote for Region free, or 1 for Region 1, 2 for Region 2 and

so on.

5.  Press Open button on your player.

6.  Press Standby on the Remote.

 

Player may stick on FBI warnings.  Try this: Press Forward Search x2 or faster,

the disc should skip straight to the main feature.

 

Hitachi HTD-K150

 

 

1.  Open the player tray.

2.  Press Volume Up, Fast Forward on the remote control.

3.  The display on the TV should read 321"0".

4.  Press Volume Up, Fast Forward on the remote control.

5.  The display should now read 321"1", meaning the player is in region 1.

6.  You can continue to press Volume Up and Fast Forward to shuffle through the

regions 2, 3, 4, 5, 6.

7.  The above method seems to be a temporary hack.

8.  To make the change more permanent, press the Angle key on the remote control

for 5 seconds.

9.  This player also has Macrovision disabled out-of-the-box.

 

 

 

Hitachi HTD-K170

 

 

1.  Ensure your player is set to it's default settings. Press Setup, Preferences

then select Default

2.  Press Open on the remote.

3.  Press Setup .

4.  Press 1, 1, 1, 1, 1 and 0 for region fee.

5.  You should then see "OK" appear on the display.

 

 

 

Hiteker AD-600A

 

 

1.  Press Setup button on the remote.

2.  Using the on screen menu, Select the Preferences option.

3.  Press Still/Step on your remote control.

4.  Press Prev.

5.  Press Next.

6.  You will now enter the hidden setup page, and can change the player to any

Region or set it to Region Free. You can also disable Macrovision from this

menu.

 

 

Hiteker HE-1120

 

 

1.  Ensure the player tray is empty.

2.  Setup, Stop, Skip Back, Skip Fwd.

3.  You should now be in a secret menu where you can change region and

macrovision settings.

 

 

Hiteker HE-1200

 

 

1.  Ensure the player tray is empty.

2.  Setup, Stop, Skip Back, Skip Fwd.

3.  You should now be in a secret menu where you can change region and

macrovision settings.

 

 

Hiteker HE-1600

 

 

1.  Ensure the player tray is empty.

2.  Setup, Stop, Skip Back, Skip Fwd.

3.  You should now be in a secret menu where you can change region and

macrovision settings.

 

 

Hiteker HE-1700

 

 

1.  Ensure the player tray is empty.

2.  Setup, Stop, Skip Back, Skip Fwd.

3.  You should now be in a secret menu where you can change region and

macrovision settings.

This hack may not work in some of the newer firmware.

 

 

Hoher T20

 

 

1. Switch On the player.

2. Ensure that there is no disc inserted

3. Press Menu, 2, 0, 1, 1, Then 0 for Multiregion, or the number of the region

required.

 

 

 

 

Holland Electronics HE5.1

 

 

1. Make sure there is no disc in the player's tray.

2. Press Setup, Stop, Skip Backword, Skip Forward on the remote.

3. You will now be in a hidden menu where you can change the option Region ID to

1 for Region 1, 2 for Region 2, and so on, or Bypass for multi-region.

4. Press Play, followed by Setup on your remote control.

5. There is also an option for disabling Macrovision.

 

 

Home Electronics HE-510

 

 

1.  Make sure there is no disc in the player's tray.

2.  Using the remote control, key in the following: Setup, Stop, Skip Backword,

Skip Forward.

3.  You will now be in a hidden menu where you can change the option Region ID

to 1 for Region 1, 2 for Region 2, and so on, or Bypass for multi-region.

4.  Press the Play, followed by Setup buttons on your remote control.

5.  There is also an option for disabling Macrovision.

 

 

Home Electronics Slimline-2

 

 

1.  Make sure the player is in Stop mode.  (does not matter if there is a DVD in

the tray or not).

2.  Press Menu, Previous, Next, Previous, Next, Previous on the remote.

3.  In the upper right section of the screen you will see "VER 2" (or whatever

region is set).

4.  Use the cursor up and down buttons until it says "VER 255" for region free.

5.  Press Menu.

To enable VCD playback, and change Macrovision settings:

 

1. Change VER 3001 and 4001 to 3000 and 4000 respectively to disble Macrovision.

2. Change VER 5001 to 5000 to enable VCD playback.

 

 

Hoyo DVD-713

 

 

1.  Switch the player on.

2.  Press Setup.

3.  Press Slow.

4.  Press Skip left.

5.  Press Skip right.

6.  Then you can select the region code with the cursor.

 

 

Hoyo DVD-715

 

 

1.  Switch the player on.

2.  Press Setup.

3.  Press Slow.

4.  Press Skip left.

5.  Press Skip right.

6.  Then you can select the region code with the cursor.

 

 

Hoyo DVD-8050

 

 

1.  Press Eject and leave tray open.

2.  Press 1, 1, 1 and 1.

3.  Press desired region number.

4.  You may well see *** appear in the top left of the screen, this is the point

at which you change Region

5.  Close tray and play the movie.

 

 

Hoyo DVD-8050D

 

 

1.  Press Eject and leave tray open.

2.  Press 1, 1, 1 and 1.

3.  Press desired region number.

4.  You may well see *** appear in the top left of the screen, this is the point

at which you change Region

5.  Close tray and play the movie.

 

 



Fun files and pictures

Movie clips

Free MID polyphonic Ringtones for mobile phones to download

DVD region unlock codes main Index page

 

Back to home page  http://www.ssrichardmontgomery.com

 

 

Custom sitemap for www.ssrichardmontgomery.com